Press pads (top boards) for laminator

Special features:

  • Exellent thickness accuracy – achieve high cushioning and high restore property.
  • Exellent heat resistance - No smell or burning i developed under 230° C operation.
  • Long term of use - hundreds of cycles repeat use may be achievedby low change of properties.
  • Low contamination – Not develop any contaminations as paper powder.
  • Low pollution- Low moisture absorption, low out gas property.

h2 img

Options:

  • Ensure an even distribution of heat and pressure during the soldering of plastic in the press laminator, avoiding incomplete lamination and deformation of plastic cards.
  • Due to the high thermal conductivity contributed to a significant reduction in card manufacturing cycle and increase productivity up to 30%.
  • Prevent the occurrence of mechanical damage of the laminating plates.

    •  

TopBoard YOM01K2

Three-layer press pads consists of glass-fibre cloth with rubber-coated heat-resistant synthetic fabric.
Parameters: pressure to 15MPA, press temperature up to 230 °C, the compressive strength of 3 kg / m², compression thickness 1.15 mm.
Use for all types of laminators.

 

img 1

Top Board YOM02FGK

Five-layer press pads. It consists of heat resistant fabric (glass-fibre cloth), fluorine rubber and adhesive. Parameters: pressure to 15MPA, press temperature up to 230 °C, the compressive strength of 3 kg / m², compression thickness 1.75 mm.

img 2